The main content of the daily maintenance of CNC machine tools: the daily maintenance of CNC machine tools requires maintenance personnel not only to have knowledge of machinery, processing technology and hydraulics, but also to have knowledge of electronic computers, automatic control, driving and measurement technology, so that they can Understand and master CNC lathes, and do a good job of maintenance in time.
To
　　The main maintenance tasks include the following:

　　 (1) Choose an appropriate use environment. The use environment of CNC lathes (such as temperature, humidity, vibration, power supply voltage, frequency and interference, etc.) will affect the normal operation of the machine, so when installing the machine, it should strictly comply with the installation conditions and requirements specified in the machine manual. When economic conditions permit, the CNC lathe should be installed separately from ordinary machining equipment to facilitate repair and maintenance.

　　 (2) The CNC lathe shall be equipped with specialized personnel for CNC system programming, operation and maintenance. These personnel should be familiar with the machine tool's machinery, numerical control system, high-voltage equipment, hydraulic pressure, air pressure and other characteristics, use environment, processing conditions, etc., and be able to correctly use the CNC lathe in accordance with the requirements of the machine tool and system operating instructions.

　　 (3) Clean up in time. Such as the cleaning of air filters and electrical cabinets, and the cleaning of printed circuit boards.

　　 (4) The inspection of the machine tool cable is mainly to check the moving joints of the cable and whether there are faults such as poor contact, disconnection and short circuit at the corners of the cable.　　　　

　　 (5) The parameter memory of some CNC systems uses CMOS components, and the stored content is maintained by battery power when the power is off. When a low voltage alarm occurs, the battery must be replaced in time, and the control system must be energized, otherwise the stored parameters will be lost and the CNC system will not work.

　　 (6) Long-term maintenance of the CNC lathe is not required. When the CNC lathe is not in use, the CNC system should be energized frequently, and if the machine is locked, run it dry. In the rainy season when the air humidity is relatively high, the electricity should be turned on every day, and the heat of the electrical components themselves should be used to drive away the moisture in the CNC cabinet to ensure the stable and reliable performance of the electronic components.

How to choose a high-quality CNC lathe processing center manufacturer? We can inspect and select a CNC lathe processing manufacturer from the following points.

First of all, whether the selected processing center manufacturer has sufficient R&D and production experience.

I believe that all my friends know that as a modern, high-tech product, the CNC lathe machining center is not enough for equipment production. It also needs strong production technology and production experience to support it. Therefore, when we choose a CNC lathe manufacturer, whether the manufacturer has a relatively strong production technology and reliable production experience is an aspect that we have to investigate.

Secondly, can the selected machining center manufacturer provide us with a complete technical service plan?

Although there are so many machining center systems, each manufacturer has its own advantages in optimizing the performance of machine tools, especially the operating performance of the machine tools. If a machining center manufacturer cannot provide you with a complete technical service plan, it will inevitably allow us to spend more time to get familiar with the use of machine tools. Therefore, a complete technical service plan is extremely important.

Third, in terms of after-sales service, we are also a factor that cannot be ignored.

In the process of using CNC machine tools, it is inevitable that unexpected problems will be encountered. If the selected machining center manufacturer can immediately solve the problem of use for us, it will save us a lot of time and cost, thereby improving our processing efficiency.